«SORBITIZATION» தொடர்புடைய ஆங்கிலம் புத்தகங்கள்
பின்வரும் புத்தக விவரத்தொகுப்புத் தேர்ந்தெடுப்பில்
sorbitization இன் பயன்பாட்டைக் கண்டறியுங்கள்.
sorbitization தொடர்பான புத்தகங்கள் மற்றும் ஆங்கிலம் இலக்கியத்தில் அதன் பயன்பாட்டுச் சூழலை வழங்குவதற்கு அதிலிருந்து பெறப்பட்ட சுருக்கமான சாரங்களைத் தொடர்புபடுத்துகின்றன.
1
The Indian & Eastern Engineer
... and inexpensive installation designed and fabricated in the Bhilai Steel Plant
464 YOUR GUARANTEE OF ft "THE ORIGINAL Variac QUALITY motwane. The
last mentioned principle is chosen for the process of sorbitization of Crane
wheels.
Representatives of the Dnepropetrovsk iron and steel institute also presented
reports on the production of thermally strengthened rolled products and the '
sorbitization' of wire rod on contemporary rolling mills. The tensile strength and
yield ...
3
A.S.M. Review of Metal Literature: An Annotated Survey of ...
Increasing the wear resistance of crane wheels by a sorbitization heat treatment
process is described as most effective. Sorbitization is a process of hardening by
interrupted quenching - - heating to a temperature of AC3 plus 30 to 50 C. , and ...
American Society for Metals,
1966
4
Selected Abstracts from the Abstracts Journal, Metallurgy
... to remove scale which had formed; automatic Hj annealing; machining the
rotating surface; sorbitization; supplementary annealing and boring out of axle
opening; equipment for H consists of a stand made to hold and rotate a crane
wheel, ...
5
Russian Castings Production
This has made it possible to replace surface hardening with high-frequency
heating for sorbitization, substantially extending the life of the travelling wheels.
The mechanical properties of samples from 140 melts showed tensile strength 72
-76 ...
6
Soviet Engineering Research
Many methods for lengthening the life of crane track wheels and rails are known:
use of sorbitization and other methods of heat treatment of the wheels, lubrication
of their flanges, replacement of forged wheel blanks by rolled ones, use of ...
7
Russian Journal of Heavy Machinery
UNIT FOR INDUCTIONAL IFC TREATMENT (SORBITIZATION) OF CRANE
WHEELS This unit includes a power supply (a transformer or autotransformer), a
heating module, a control board, and special equipment for water cooling of the ...
8
The Abstracts Journal. Metallurgy. Part B. the Technology of ...
Schemes are provided in relation to the set-up of the Kuznetsk Metallurgical
Combinat and the Dzerzhinskii plant for the sorbitization of crane wheels. 351.
Isothermic transformation of austenite of highspeed steel. A. P. Gulajew, K.A.
Malinina.
Met., 1960, (4), 145-160) [In Russian] The sorbitiza- tion of rail heads increases
appreciably their mochanical properties, but one sorbitization alone or a
sorbitization and a tempering below 600° does not impart ductile properties to the
metal ...
Met., 1960, (4), 145-160) [In Russian] The sorbitiza- tion of rail heads increases
appreciably their mechanical properties, but one sorbitization alone or a
sorbitization and a tempering below 600^ does not impart ductile properties to
the metal ...
Iron and Steel Institute,
1962