10 ENGLISH BOOKS RELATING TO «WEARING COURSE»
Discover the use of
wearing course in the following bibliographical selection. Books relating to
wearing course and brief extracts from same to provide context of its use in English literature.
1
Asphalt Pavements: A Practical Guide to Design, Production ...
Most HMA mixtures have a substantial overlap of mixture application. The
aggregate top size in an asphalt mixture governs the minimum and maximum
pavement layers or lift thicknesses. The minimum thickness for a wearing course
usually ...
2
Building the Future: Innovation in design, materials and ...
Same tests on the surfaced deck with the synthetic porous wearing course ZOK at
± 17.0°C, showed at these locations reductions in steel stress varying between
35 and 57%. Dynamic loading tests carried out on the surfaced deck with the ...
G.S.T. Armer, J.L. Clarke, F.K. Garas, 2003
3
Road Engineering for Development, Second Edition
Wearing The wearing course is the uppermost layer of a sealed pavement. It
provides the course riding surface for the road users. The wearing course should
be smooth and dust-free and have adequate skid resistance. It should protect the
...
Richard Robinson, Bent Thagesen, 2004
4
Pavements Unbound: Proceedings of the 6th International ...
Canada ABSTRACT: A literature review was conducted to help develop a
performance-based specification for materials intended to be used as the
wearing course in forest roads built from unbound aggregate. A survey of eastern
Canadian ...
5
Bituminous Mixtures in Road Construction
Cooling of chipped bituminous mixtures The cooling of a chipped layer is much
more difficult to analyse. The functions of the roadbase, the basecourse and the
wearing course have been covered in chapters 1, 2 and 3. Premature failure of ...
6
Standard Specifications for Two-
course Concrete Pavement: ...
removed before the wearing course is applied. The reinforcing metal shall be
placed upon and slightly pressed into the concrete base immediately after it is
placed. _ In case of a breakdown, concrete shall be mixed by hand to complete
the ...
American Concrete Institute, 1915
7
Documents of the Senate of the State of New York
Rollers used for the initial compression of the wearing course shall be well
balanced, self-propelled tandem rollers weighing between 7 and 8 tons each.
Each shall have a compression under the rear roller of between 200 and 300
pounds per ...
New York (State). Legislature. Senate, 1915
Hollers used for the initial compression of the wearing course shall be well
balanced, self-propelled tandem rollers weighing between 7 and 8 tons each.
Each shall have a compression under the rear roller of between 200 and 300
pounds per ...
New York (State) Dept. of Efficiency and Economy, John H. Delaney, 1915
9
Raina'S Field Manual For Highway & Bridge Engineers
Group Three: wearing course material: - 14 mm nominal size open-textured
wearing course macadam, - 10 mm nominal size open-textured wearing course
macadam, - 6 mm nominal size medium-textured wearing course macadam, - 14
mm ...
Virindra Kumar Raina, 2007
10
Standards and Specifications for Nonmetallic Minerals and ...
If dirt, sand, or dust collects on the base it shall be removed before the wearing
course is applied. Workmen shall not be permitted to walk on the freshly-laid
concrete. Any concrete in excess of that needed to complete a section at the
stopping ...
NEWS ITEMS WHICH INCLUDE THE TERM «WEARING COURSE»
Find out what the national and international press are talking about and how the term
wearing course is used in the context of the following news items.
County lists roads to be repaired, repaved in spring, summer
Bonded wearing course, which is a thin layer of paving. Caltrans has done similar work around the county. Caltrans defines it as “a gap graded, ultra thin hot-mix ... «Santa Rosa Press Democrat, Nov 12»
