अंग्रेज़ी किताबें जो «RUDDERHEAD» से संबंधित हैं
निम्नलिखित ग्रंथसूची चयनों में
rudderhead का उपयोग पता करें।
rudderhead aसे संबंधित किताबें और अंग्रेज़ी साहित्य में उसके उपयोग का संदर्भ प्रदान करने वाले उनके संक्षिप्त सार।.
1
The Duke's Sweetheart: A Romance:
"Yes; butthe rudderhead. Drew, the rudderhead! That is not a thingtotriflewith." "
Your grace will remember I could not get at it, owing to the seat." "Well, talking
won't undo theevil now. What do you propose doing?" "We've curedit so far, your
...
If your current rudderhead fitting is like the one shown here but reliant only on a
keyway, you can add tapered-point set screws to spread the load. Drill three
holes, square to the shaft and S/16 inch (8 mm) in diameter. The holes should go
...
3
Details of Classic Boat Construction
Photo 22.37 I shaped the 11⁄4inchthick cheekpieces to fit the rudderhead. (The
shaping for the rudder blade has been stopped just below the cheeks to provide
a simple, flat joint.) I clamped the two cheeks in place and lined them up, then ...
4
Patents for Inventions: Abridgments of Specifications : ...
3, is approached, the chain -wheel or quadrant 4 is mounted at a distance from
the rudderhead 1, instead of being connected directly thereto, and two sets of
links or levers 5, each consisting of four pivoted members, are so interposed ...
5
The Edinburgh Philosophical Journal ... Edinburgh, Constable ...
Heave your rudder overboard, haul upon the guy made fast to the rudderhead (
this will lead it to the rudder-case), and rouse in the slack of the rudder heel-
ropes. Bring the rudder-head up the rudder-case, and, when high enough, haul
taut ...
6
Edinburgh New Philosophical Journal
Heave your rudder overboard, haul upon the guy made fast to the rudderhead (
this will lead it to the rudder-ease), and rouse in the slack of the rudder heel-
ropes. Bring the rudder-head up the rudder-case, and, when high enough, haul
taut ...
7
Boatowner's Mechanical and Electrical Manual: How to ...
How to Maintain, Repair, and Improve Your Boat's Essential Systems Nigel
Calder. FIGURE 14-16B. Using a bosun's chair to keep a rudder from falling out
of the boat when undoing the rudderhead fitting. (Jim Sollers) FIGURES 14-17A ...
8
Wild Shore: Exploring Lake Superior by Kayak
An hour after that we found shelter behind Rudderhead Point. Exhausted, we
landed on a hard sand beach in the lee of the point. We snacked while ravens
flapped lazily overhead and a ring-billed gull begged for pieces of bagel.
9
American Ship Models and How to Build Them
Put on the metal part at the rudderhead and connect the rod. The rod has an eve
in the outer end and fits into the housing on the rudderhead. It is held fast bv a
boit drouued down through the housing. Paint the metal parts biack. Return to the
...
10
Storm Tactics Handbook
Other Sailors and Their Stories Figure 20-3.- As you can see in this photo, the
rudderhead fitting splayed wide open. David feels that instead of screws, bolts
should have been used to hold the tiller in place. Eight hours after the storm
abated, ...
«RUDDERHEAD» पद को शामिल करने वाली समाचार सामग्रियां
इसका पता लगाएं कि राष्ट्रीय और अंतर्राष्ट्रीय प्रेस ने निम्नलिखित समाचार सामग्रियों के बारे में क्या चर्चा की है और इस संदर्भ में
rudderhead पद का कैसे उपयोग किया है।
The Boat from Buttevant Brings Home the Bacon
... of the amount of helm necessary, and as the boats aged there was increasing flexibility – to put it mildly - in the connection between rudderhead and tiller. «Afloat, फरवरी 13»