Tegesé saka "live centre" ing bausastra Basa Inggris

PANGOCAP SAKA LIVE CENTRE ING BASA INGGRIS

live centre  [laɪv]

APA TEGESÉ LIVE CENTRE ING BASA INGGRIS?

Lathe tengah

Lathe center

Pusat lathe, sing kerep dipendhet dadi pusat, minangka alat sing wis diarani titik sing akurat nggampangake sawijining benda kerja ing sumbu. Biasane biasane duwe sudhut 60 °, nanging ing kondisi mesin sing abot, sudute 75 ° digunakake. Panggunaan utami tengah yaiku kanggo nyediakake karya concentric; iki ngidini workpiece ditransfer antarane operasi mesin tanpa mundhut saka akurasi. Sebagean bisa diuripake ing lathe, dikirim kanggo hardening lan tempering lan banjur ngubengi pusat ing grinder silinder. Pengawetan concentricity antarane operasi ngowahi lan mecah iku penting kanggo kualitas karya. Pusat uga digunakake kanggo ndhukung workpiece maneh ngendi pasukan nglereni bakal deflect karya banget, ngurangi ngrampungake lan akurasi benda kerja, utawa nggawe kahanan sing mbebayani. Lathe tengah duwe aplikasi ing ngendi wae sing nduweni workpiece tengah bisa digunakake; iki ora diwatesi karo panggunaan lathe nanging uga kalebu setting ing kepala pamisah, penggiling silinder, alat lan pemotong panggilingan utawa peralatan liyane sing gegandhengan.

A lathe center, often shortened to center, is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have an included angle of 60°, but in heavy machining situations an angle of 75° is used. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. The preservation of concentricity between the turning and grinding operations is crucial for quality work. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece, or creating a hazardous situation. A center lathe has applications anywhere that a centered workpiece may be used; this is not limited to lathe usage but may include setups in dividing heads, cylindrical grinders, tool and cutter grinders or other related equipment.

PERTALAN SAKA LIVE CENTRE

Weruhi pertalan saka live centre menyang 25 basa nganggo Basa Inggris pamertal multi basa kita.

pertalan saka live centre saka Basa Inggris menyang basa liyané kang kasuguhaké ing perangan iki kajupuk saka pertalan statistik otomatis; ing ngendhi inti unit pertalan yaiku tembung «live centre» ing Basa Inggris.

• Pamertal Basa Inggris - Basa Cina: 直播中心
• Pamertal Basa Inggris - Basa Spanyol: centro vivo
• Basa Inggris: live centre
• Pamertal Basa Inggris - Basa India: लाइव केंद्र
• Pamertal Basa Inggris - Basa Arab: مركز الحية
• Pamertal Basa Inggris - Basa Rusia: кернер
• Pamertal Basa Inggris - Basa Portugis: centro vivo
• Pamertal Basa Inggris - Basa Bengali: লাইভ সেন্টার
• Pamertal Basa Inggris - Basa Prancis: centre en direct
• Pamertal Basa Inggris - Basa Malaysia: Pusat hidup
• Pamertal Basa Inggris - Basa Jerman: Live- Zentrum
• Pamertal Basa Inggris - Basa Jepang: ライブセンター
• Pamertal Basa Inggris - Basa Korea: 라이브 센터
• Pamertal Basa Inggris - Basa Jawa: Urip tengah
• Pamertal Basa Inggris - Basa Vietnam: trung tâm trực tiếp
• Pamertal Basa Inggris - Basa Tamil: நேரடி மையம்
• Pamertal Basa Inggris - Basa Marathi: लाइव्ह सेंटर
• Pamertal Basa Inggris - Basa Turki: Canlı merkez
• Pamertal Basa Inggris - Basa Italia: centro vivo
• Pamertal Basa Inggris - Basa Polandia: centrum żywo
• Pamertal Basa Inggris - Basa Ukrania: кернер
• Pamertal Basa Inggris - Basa Romawi: centrul live
• Pamertal Basa Inggris - Basa Yunani: ζωντανό κέντρο
• Pamertal Basa Inggris - Basa Afrikaans: live sentrum
• Pamertal Basa Inggris - Basa Swedia: levande centrum
• Pamertal Basa Inggris - Basa Norwegia: levende sentrum

BUKU BASA INGGRIS KAKAIT KARO «LIVE CENTRE»

Temukaké kagunané saka live centre ing pilihan bibliografi iki. Buku kang kakait dening live centre lan pethikan cekak kang padha kanggo nyediyakaké panggunané ing sastra Basa Inggris.

Machine Shop Notes ...: For the Use of Studnets in Shopwork; ...

The centre in the headstock spindle, or head spindle, is called the live centre, and the one in the tailstock spindle, or tail ... live centre has a line on its shank parallel with its axis ; to insure that the centre shall always be put back in the same ...

Robert Henry Smith, 1896

Modern Machine-shop Practice

At this second turning the work will have had both work centres worn to fit the dead centre, hence if it be of the same angle as the live centre, the work will properly bed to both centres, otherwise it will plainly not bed well to the live centre, and ...

Joshua Rose, 1906

Manufacturing Processes

A wooden piece is held between the two centres, the live centre and dead centre and rotated by giving power to the live centre through the speed change pulleys mounted rigidly on the spindle. A sharp tool held in hand and supported on tool ...

Kaushish, 2008

Modern machine-shop practice operation, construction, and ...

At this second turning the work i will have had both work centres worn to fit the dead centre, hence if it be of the same angle as the live centre, the work will properly bed to both centres, otherwise it will plainly not bed well to the live centre, and ...

J. Rose

Manufacturing Technology Vol-Ii 2E

The centre located in the spindle is termed as live centre, while that in the tailstock is termed as dead centre. The shank of the centre is generally finished with a morse taper which fits into the tapered hole of the spindle or tailstock. Tapered ...

Rao, 2009

Machine Drawing

23.3.4 Revolving Centre When long bars are machined in a lathe, they are supported in two centres, one of which is called a live centre and the other a dead centre. The live centre fits into the main spindle and is so called because it revolves ...

Sidheshwar, 1990

Machine Drawing

18.19 Milling machine tail-stock 18.3.7 Revolving Centre When long bars are machined on a lathe, they are suppported on two centres, one of which is called a live centre and the other, a dead centre, fixed in the tail-stock. The live centre fits ...

K. L. Narayana, 2007

Manufacturing Technology: Metal cutting and machine tools

For this purpose, generally a carrier plate and a dog, as shown in Fig. 4.8, would be used. The centre located in the spindle is termed live centre, while that in the tailstock is termed the dead centre. The shank of the centre is generally finished ...

Posinasetti Nageswara Rao, 2013

Machinery

Place the test bar in the live centre bearing, leaving it unsupported at the outer end, and cause the spindle to rotate. If the outer end of the bar luns perfectly true, then the bearing must be concentric with the spindle. To test the parallelism of the  ...

‎1900

Machinery

Place the rest bar in the live centre bearing, leaving it unsupported at the outer end, and cause the spindle to route. If the outer end of the bar tuns perfectly true, then the bearing must be concentric with the spindle. To test the parallelism of the  ...

Lester Gray French, 1899

BABAGAN WARTA KANG NGLEBOKAKÉ ARAN «LIVE CENTRE»

Weruhi yèn pawarta nasional lan internasional wis ngomongaké lan kepriyé aran live centre digunakaké ing babagan warta iki.

Australia - Rugby Union News | Live Scores, Odds | Sporting Life

Rugby Union/; Live Centre/; Australia V South Africa. MatchCentre. Australia. Team: Israel Folau · Adam Ashley-Cooper · Tevita Kuridrani · Matt ... «Sportinglife.com, Jul 15»

This page will update automatically

Football/; Live Centre/; Arsenal V Everton. MatchCentre. Arsenal. Starting Formation: 4-4-2 cross. 33. Petr Cech; 24. Hector Bellerin 76'; 21. «Sportinglife.com, Jul 15»

Cricket Live Centre

Cricket Live Centre. Sri Lanka vs Pakistan. Match info: Sri Lanka v Pakistan ODI Series 2015 at Rangiri Dambulla International Stad. - 1st ODI. «Sportinglife.com, Jul 15»

New York City Fc V New York Red Bulls

Football/; Live Centre/; New York City Fc V New York Red Bulls. MatchCentre. New York City FC. Starting Formation: 4-4-2 cross. 12. «Sportinglife.com, Jun 15»

New York Red Bulls V Real Salt Lake

Football/; Live Centre/; New York Red Bulls V Real Salt Lake. MatchCentre. New York Red Bulls. Starting Formation: 4-4-2 cross. 31. «Sportinglife.com, Jun 15»

Denmark U21 V Serbia U21

Football/; Live Centre/; Denmark U21 V Serbia U21. MatchCentre. Denmark U21. Starting Formation: 4-4-2 cross. 1. Jakob Busk Jensen; 2. «Sportinglife.com, Jun 15»

Italy U21 0 - 0 Portugal U21

Football/; Live Centre/; Italy U21 V Portugal U21. MatchCentre. Italy U21. Starting Formation: 4-3-3 cross. 1. Francesco Bardi; 22. Davide ... «Sportinglife.com, Jun 15»

Atalanta 1 - 3 AC Milan

Football/; Live Centre/; Atalanta V AC Milan. MatchCentre. Atalanta. Starting Formation: 4-3-3 cross. 57. Marco Sportiello; 22. Davide ... «Sportinglife.com, Mei 15»

Feyenoord 2 - 2 Heerenveen

Football/; Live Centre/; Feyenoord V Heerenveen. MatchCentre. Feyenoord. Starting Formation: 4-3-3 cross. 16. Kenneth Vermeer; 26. «Sportinglife.com, Mei 15»

Chievo 1 - 1 Atalanta

Football/; Live Centre/; Chievo V Atalanta. MatchCentre. Chievo. Starting Formation: 4-4-2 cross. 1. Albano Bizzarri; 21. Nicolas Frey; 3. «Sportinglife.com, Mei 15»