«STACK-UP» 관련 영어 책
다음 도서 목록 항목에서
stack-up 의 용법을 확인하세요.
stack-up 에 관련된 책과 해당 책의 짧은 발췌문을 통해 영어 서적에서 단어가 사용되는 맥락을 제공합니다.
1
Complete PCB Design Using OrCAD Capture and PCB Editor
Although PCB Editor's Layout Cross Section dialog box allows you to define a
stack-up, the PCB layer stack-up and thicknesses are really assigned when the
board is ordered from the manufacturer. But the PCB layer stack-up and
thickness ...
2
Complete PCB Design Using OrCad Capture and Layout
functional stack-up with two full routing layers, two partial routing layers (which
share layers with the PWR and PWR layers), and ground planes that are
adjacent to all signal and power layers and provide shielding for the inner signal
traces.
3
Algorithms and Data Structures: 5th International Workshop, ...
The stack-up problem is the question of whether all bins can be removed step by
step from q such that the positions of the bins removed from q are always not
greater than s and after each removal there are at most p open pallets. If a bin b
is ...
4
Product Design Methods and Practices
One way to help alleviate the tolerance stack-up problem would be to integrate
the upper hinge and lower pivot into one assembly as shown in Fig. 15.6c. This
helps insure a proper relationship between the hinge and the pivot, but doesn't ...
5
Algorithms and Computation: 9th International Symposium, ...
Integer s corresponds to the capacity of the storage conveyer, and integer p
corresponds to the number of stack-up places, because each open pallet
occupies one stack-up place. A sequence q is called an (s, p)-sequence if it can
be ...
Kyung-Yong Chwa, Oscar H. Ibarra,
1998
6
Inside the Multi-Generational Family Business: Nine Symptoms ...
11. Surviving. Generational. Stack-Up. Now. and. Later. We've reached the
proverbial end of the road. We've talked about the trends driving generational
stack-up in family businesses, the idea that stack-up can be seen as a syndrome,
or set ...
7
Subsea Pipelines and Risers
30.5 Drilling Riser Analysis Model 30.5.1 Drilling Riser Stack-up Model A typical
drilling riser stack-up is schematically shown in Figure 30.2. The weight in air and
seawater for the telescopic joint, flex joints, LMRP and BOP need to be defined ...
Yong Bai, Qiang Bai,
2005
8
Grounds for Grounding: A Circuit to System Handbook
Four-Layer Stack-up [Figure 9.208(a)]. A four-layer PCB is the most fundamental
multilayer stack-up. On a four-layer board, power and return planes are usually
placed on the inner layers. This configuration provides optimal power distribution
...
Elya B. Joffe, Kai-Sang Lock,
2011
9
Advanced Computer-aided Fixture Design
2.4 ADVANCED TOPICS 2.4.1 Setup Plan Evaluation Common objectives in
setup planning are to (1) minimize the number of setups and (2) minimize
tolerance stack-up. Once a setup plan is generated, the number of setups is
immediately ...
Yiming Rong, Samuel H. Huang, Zhikun Hou,
2005
10
Solving Mechanical Design Problems with Computer Graphics
2.9.2 Tolerance Stack-Up Purpose To learn the TOLERANCE STACK-UP
command and how to apply it to automatically compute the tolerance stack-up (
tolerance accumulation) of selected linear dimensions in the same direction,
vertical or ...