इंग्रजी मध्ये METALLOGRAPHICALLY म्हणजे काय?
इंग्रजी शब्दकोशातील metallographically व्याख्या
मेट्रोलोग्राफीमध्ये शब्दकोशातील परिभाषा म्हणजे मेटलर्जिलीच्या शाखेशी संबंधित आहे ज्याचा संबंध धातू व मिश्रधातूच्या रचना आणि संरचनेशी संबंधित आहे. मेटलाग्राफोग्राफीची आणखी एक परिभाषा म्हणजे दगडांऐवजी मेटल प्लेट्स वापरून लिथोग्राफिक प्रक्रिया; मेटल लिथोग्राफी
«METALLOGRAPHICALLY» संबंधित इंग्रजी पुस्तके
खालील ग्रंथसूची निवडीमध्ये
metallographically चा वापर शोधा. इंग्रजी साहित्यामध्ये वापराचा संदर्भ देण्यासाठी
metallographically शी संबंधित पुस्तके आणि त्याचे थोडक्यात उतारे.
1
ASM Metals Reference Book
Samples must be free from high vapor pressure liquids, such as water, organic
cleaning solutions, and remnant oil-base films Limitations • Image quality on
relatively flat samples, such as metallographically polished and etched samples,
...
2
Fossil Energy Program Report
The metallographically assessed total corrosion of the alloys was assessed
metallographically as a function of time and temperature in the simulated coal
gasification atmosphere used (mole fractions at 1 atm, 25°F, 0.2014 CO, 0.1151
CO2, ...
Gerhard Hirt, Reiner Kopp. thermo-element placed within the samples centre. A
temperature of 200 C after a cooling time of 7 s was reached, so that cooling
rates of 100–200 K sÀ1 were realized. Figure 3.15 shows the metallographically
...
Gerhard Hirt, Reiner Kopp,
2009
4
Automotive Alloys 1999: Symposium proceedings held during ...
Fractured samples were metallographically prepared to determine the fracture
mechanism. The bend testing of the above mentioned alloys were carried out by
bending them to give r/t value of ~0.1. The surface roughness measurements
were ...
5
Proceedings of the Conference on In Situ Composites, ...
The probability p (x) of finding two cracks on a fiber separated by a distance x is :
(1.11) In p(x) = Inb + (x/S) In ( I - b8) where b is the average number of cracks per
unit length, determined metallographically. By measuring the values of p< x) ...
6
Handbook of Surface and Interface Analysis: Methods for ...
13.2.2 METALLOGRAPHICALLY POLISHED SPECIMENS In this section, it is
assumed that sufficient material is available for a specimen to be mounted in a
conducting mount and polished using various grit sizes ending finally with a
micron ...
John C. Riviere, Sverre Myhra,
2009
7
Heat Treating: Proceedings of the 23rd Heat Treating Society ...
The multi-gap specimens were peel tested and metallographically evaluated and
the lap shear specimens were pulled to finalize the braze alloy selection process.
Good braze joints were obtained with both alloys. Based on the test results, ...
ASM Heat Treating Society. Conference and Exposition, Daniel Herring, Robert Hill,
2006
8
Proceedings of the International Conference on the Strength ...
Irradiated and non-irradiated molybdenum specimens have been mechanically
tested in compression and tension, at a strain rate of 4.2 10~4secM, and
subsequently examined metallographically. Results are displayed in Tables 3
and 4.
9
SPE/ANTEC 2000 Proceedings
The metallographically polished thickness sections were viewed in a scanning
electron microscope (SEM; Jeol 5400) after gold coating. Generally a 5 layer
structure composed of 2 surface (skin) 2 subsurface (shear) and 1 core layer
could be ...
10
Proceedings of Crack Paths (CP 2012), Gaeta, Italy 2012
Values of spacing between dendrite arms determined metallographically by
linear method comprise logically dendrite arms of various orders. The mean
value of dendrite arms spacing determined with use of the Eq. (5) deviates for
short local ...
नवीन गोष्टी ज्यामध्ये «METALLOGRAPHICALLY» ही संज्ञा समाविष्ट आहे
खालील बातम्यातील आयटमच्या संदर्भात राष्ट्रीय आणि आंतरराष्ट्रीय पत्रकार कशाबद्दल बोलले आहेत आणि
metallographically ही संज्ञा कशी वापरली आहे ते शोधा.
Scratching the Surface on Corrosion Testing of Automotive Coatings
These sections were metallographically prepared in the same manner as the pre-exposure samples and retained for future reference. «Products Finishing Magazine, जून 15»
2013 Hagen Symposium: Characterisation of the surface …
The simulated and metallographically determined density distribution is shown in Fig. 4. Metallographic and computed density figures match ... «Powder Metallurgy Review | ipmd.net, फेब्रुवारी 14»
Rapid Mechanical Characterization of Fiberglass Using a …
The sample was a section of fiberglass computer board, which was metallographically mounted and polished for nanoindentation. Fiberglass is ... «AZoNano.com, मे 12»