«SPIGOT AND SOCKET JOINT» संबंधित इंग्रजी पुस्तके
खालील ग्रंथसूची निवडीमध्ये
spigot and socket joint चा वापर शोधा. इंग्रजी साहित्यामध्ये वापराचा संदर्भ देण्यासाठी
spigot and socket joint शी संबंधित पुस्तके आणि त्याचे थोडक्यात उतारे.
1
Design Of Machine Elements
Spigot and socket joint 5. Circular flanged joint 6. Oval flanged joint 7. Square
flanged joint For transport of fluids under low pressure such as water carrying
from one place to another, coupler joint, nipplejoint, spigot and socket joints are
used.
2
Handbook of Pipe Bursting Pratice
5.17: Structure of steel pipes with internal and external protection, spigot-and-
socket joint (Photo Mannesmann Fuchs Rohr GmbH, Siegen, Germany) 6 A C D
Fig. 5.18: Structure of steel pipes. 5. Suitable new pipe materials 97 Steel pipes.
3
FCS Construction Materials L3
The socket usually has a bigger diameter than the rest of the pipe, so that the
spigot can fit inside it to form a spigot and socket joint. We will now discuss some
of the types of pipes that are available, namely, in-the-wall joint pipes,
interlocking ...
4
FUNDAMENTALS OF MACHINE DRAWING
7.16 SPIGOT AND SOCKET JOINT In this joint, as shown in Figure 7.65, a socket
is made by enlarging the end of one rod and the end of the other rod fitted into it.
A cotter is inserted through the slots in the spigot and socket to make the joint.
SADHU SINGH, P. L. SAH, 2012
5
Modern Dictionary-Civil Engineering
172 SOAK PIT Soak Pits Socket The female part of a spigot and socket joint. Soffit
or Crown The highest portion of the interior of a sewer. Soil Sewage The sewage
from water-closets, slop sinks and urinals and a mixture of this sewage with ...
5.12 Compare the method of joining rods using the sleeve and cotter with the
spigot and socket joint method. 5.13 How a sleeve and cotter joint can be
cheaper as compared to spigot and socket joint? 5.14 What is the limitation on B/t
ratio of ...
7
Dictionary of Architecture
and Building Construction
... opus spicatum. !83 spick see brotch. spier see spere. spigot the plain or
threaded end of a drainage pipe shaped to fit into the socket of another pipe and
form a join in a pipeline. spigot-and-socket joint, bell-and-spigot joint (Am.),
spigot joint; ...
Nikolas Davies, Erkki Jokiniemi, 2008
8
Water Supply Engineering
... (i) Spigot and socket joint. Fig. 15.1 shows the spigot and socket (bell) joint.
The enlarged end of the pipe is known as the socket or bell. The socket
accommodates the normal or the spigot end. The hemp or sterilised yarn is used
to maintain ...
Dr. B. C. Punmia, Ashok Kr. Jain, Arun Kr. Jain, Dr. B.C. Punmia, Ashok Kr. Jain, 1995
9
Building Services, Technology
and Design
Flexible jointing and bedding The problem of pipe barrel failures and an
awareness of ground movement potential led to the development of a modified
spigot and socket joint. This is shown i containing polyester fairings to both spigot
and ...
10
Elements of Environmental Engineering
Pipe Joints (contd) Spigot and Socket Joint. (see Fig. 4.7 a). This joint is
commonly used in case of cast iron pipes. The spigot of one pipe is centred into
the socket of the preceding pipe; tarred gasket or hemp yarn is then wrapped
around the ...
