Maksud "live centre" dalam kamus Corsica

SEBUTAN LIVE CENTRE DALAM CORSICA

live centre  [laɪv]

APAKAH MAKSUD LIVE CENTRE dalam CORSICA?

Pusat Lathe

Lathe center

Pusat pelarik, yang sering dipendekkan ke tengah, adalah alat yang telah menjadi titik untuk meletakkan kedudukan benda kerja secara tepat pada paksi. Mereka biasanya mempunyai sudut termasuk 60 °, tetapi dalam keadaan pemesinan yang berat sudut 75 ° digunakan. Penggunaan utama pusat adalah untuk memastikan kerja sepusat dihasilkan; ini membolehkan bahan kerja dipindahkan antara operasi pemesinan tanpa kehilangan ketepatan. Bahagian boleh dihidupkan sebagai mesin pelarik, diketepikan untuk pengerasan dan penyesuian dan kemudian tanah di antara pusat-pusat dalam penggiling silinder. Pemeliharaan concentricity antara operasi beralih dan pengisaran adalah penting untuk kerja yang berkualiti. Sebuah pusat juga digunakan untuk menyokong bahan kerja yang lebih lama di mana kuasa pemotongan akan membantutkan kerja secara berlebihan, mengurangkan kemasan dan ketepatan bahan kerja, atau mewujudkan keadaan berbahaya. Lathe tengah mempunyai aplikasi di mana saja bahan kerja berpusat boleh digunakan; ini tidak terhad kepada penggunaan pelarik tetapi mungkin termasuk setup dalam membahagikan kepala, penggiling silinder, alat dan pemotong pemotong atau peralatan lain yang berkaitan.

A lathe center, often shortened to center, is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have an included angle of 60°, but in heavy machining situations an angle of 75° is used. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. The preservation of concentricity between the turning and grinding operations is crucial for quality work. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece, or creating a hazardous situation. A center lathe has applications anywhere that a centered workpiece may be used; this is not limited to lathe usage but may include setups in dividing heads, cylindrical grinders, tool and cutter grinders or other related equipment.

TERJEMAHAN LIVE CENTRE

Cari terjemahan live centre kepada 25 bahasa dengan penterjemah Corsica pelbagai bahasa kami.

Terjemahan live centre dari Corsica ke bahasa lain yang dibentangkan dalam bahagian ini telah diperolehi menerusi terjemahan statistik automatik; di mana unit terjemahan penting adalah perkataan «live centre» dalam Corsica.

• Penterjemah Corsica - Cina: 直播中心
• Penterjemah Corsica - Czech: centro vivo
• Corsica: live centre
• Penterjemah Corsica - Hindi: लाइव केंद्र
• Penterjemah Corsica - Amhara: مركز الحية
• Penterjemah Corsica - Rusia: кернер
• Penterjemah Corsica - Punjabi: centro vivo
• Penterjemah Corsica - Basque: লাইভ সেন্টার
• Penterjemah Corsica - Frisia: centre en direct
• Penterjemah Corsica - Melayu: Pusat hidup
• Penterjemah Corsica - Chichewa: Live- Zentrum
• Penterjemah Corsica - Jepun: ライブセンター
• Penterjemah Corsica - Kreol Haiti: 라이브 센터
• Penterjemah Corsica - Jerman: Urip tengah
• Penterjemah Corsica - Vietnam: trung tâm trực tiếp
• Penterjemah Corsica - Tagalog: நேரடி மையம்
• Penterjemah Corsica - Marathi: लाइव्ह सेंटर
• Penterjemah Corsica - Turki: Canlı merkez
• Penterjemah Corsica - Itali: centro vivo
• Penterjemah Corsica - Poland: centrum żywo
• Penterjemah Corsica - Ukraine: кернер
• Penterjemah Corsica - Romania: centrul live
• Penterjemah Corsica - Cina: ζωντανό κέντρο
• Penterjemah Corsica - Afrikaans: live sentrum
• Penterjemah Corsica - Swahili: levande centrum
• Penterjemah Corsica - Parsi: levende sentrum

CORSICA BUKU YANG BERKAIT DENGAN «LIVE CENTRE»

Ketahui penggunaan live centre dalam pilihan bibliografi berikut. Buku yang berkait dengan live centre dan ekstrak ringkas dari yang sama untuk menyediakan konteks penggunaannya dalam kesusasteraan Corsica.

Machine Shop Notes ...: For the Use of Studnets in Shopwork; ...

The centre in the headstock spindle, or head spindle, is called the live centre, and the one in the tailstock spindle, or tail ... live centre has a line on its shank parallel with its axis ; to insure that the centre shall always be put back in the same ...

Robert Henry Smith, 1896

Modern Machine-shop Practice

At this second turning the work will have had both work centres worn to fit the dead centre, hence if it be of the same angle as the live centre, the work will properly bed to both centres, otherwise it will plainly not bed well to the live centre, and ...

Joshua Rose, 1906

Manufacturing Processes

A wooden piece is held between the two centres, the live centre and dead centre and rotated by giving power to the live centre through the speed change pulleys mounted rigidly on the spindle. A sharp tool held in hand and supported on tool ...

Kaushish, 2008

Modern machine-shop practice operation, construction, and ...

At this second turning the work i will have had both work centres worn to fit the dead centre, hence if it be of the same angle as the live centre, the work will properly bed to both centres, otherwise it will plainly not bed well to the live centre, and ...

J. Rose

Manufacturing Technology Vol-Ii 2E

The centre located in the spindle is termed as live centre, while that in the tailstock is termed as dead centre. The shank of the centre is generally finished with a morse taper which fits into the tapered hole of the spindle or tailstock. Tapered ...

Rao, 2009

Machine Drawing

23.3.4 Revolving Centre When long bars are machined in a lathe, they are supported in two centres, one of which is called a live centre and the other a dead centre. The live centre fits into the main spindle and is so called because it revolves ...

Sidheshwar, 1990

Machine Drawing

18.19 Milling machine tail-stock 18.3.7 Revolving Centre When long bars are machined on a lathe, they are suppported on two centres, one of which is called a live centre and the other, a dead centre, fixed in the tail-stock. The live centre fits ...

K. L. Narayana, 2007

Manufacturing Technology: Metal cutting and machine tools

For this purpose, generally a carrier plate and a dog, as shown in Fig. 4.8, would be used. The centre located in the spindle is termed live centre, while that in the tailstock is termed the dead centre. The shank of the centre is generally finished ...

Posinasetti Nageswara Rao, 2013

Machinery

Place the test bar in the live centre bearing, leaving it unsupported at the outer end, and cause the spindle to rotate. If the outer end of the bar luns perfectly true, then the bearing must be concentric with the spindle. To test the parallelism of the  ...

‎1900

Machinery

Place the rest bar in the live centre bearing, leaving it unsupported at the outer end, and cause the spindle to route. If the outer end of the bar tuns perfectly true, then the bearing must be concentric with the spindle. To test the parallelism of the  ...

Lester Gray French, 1899

BARANGAN BERITA YANG TERMASUK TERMA «LIVE CENTRE»

Ketahui apa yang diterbitkan oleh akhbar nasional dan antarabangsa dan cara istilah live centre digunakan dalam konteks perkara berita berikut.

Australia - Rugby Union News | Live Scores, Odds | Sporting Life

Rugby Union/; Live Centre/; Australia V South Africa. MatchCentre. Australia. Team: Israel Folau · Adam Ashley-Cooper · Tevita Kuridrani · Matt ... «Sportinglife.com, Jul 15»

This page will update automatically

Football/; Live Centre/; Arsenal V Everton. MatchCentre. Arsenal. Starting Formation: 4-4-2 cross. 33. Petr Cech; 24. Hector Bellerin 76'; 21. «Sportinglife.com, Jul 15»

Cricket Live Centre

Cricket Live Centre. Sri Lanka vs Pakistan. Match info: Sri Lanka v Pakistan ODI Series 2015 at Rangiri Dambulla International Stad. - 1st ODI. «Sportinglife.com, Jul 15»

New York City Fc V New York Red Bulls

Football/; Live Centre/; New York City Fc V New York Red Bulls. MatchCentre. New York City FC. Starting Formation: 4-4-2 cross. 12. «Sportinglife.com, Jun 15»

New York Red Bulls V Real Salt Lake

Football/; Live Centre/; New York Red Bulls V Real Salt Lake. MatchCentre. New York Red Bulls. Starting Formation: 4-4-2 cross. 31. «Sportinglife.com, Jun 15»

Denmark U21 V Serbia U21

Football/; Live Centre/; Denmark U21 V Serbia U21. MatchCentre. Denmark U21. Starting Formation: 4-4-2 cross. 1. Jakob Busk Jensen; 2. «Sportinglife.com, Jun 15»

Italy U21 0 - 0 Portugal U21

Football/; Live Centre/; Italy U21 V Portugal U21. MatchCentre. Italy U21. Starting Formation: 4-3-3 cross. 1. Francesco Bardi; 22. Davide ... «Sportinglife.com, Jun 15»

Atalanta 1 - 3 AC Milan

Football/; Live Centre/; Atalanta V AC Milan. MatchCentre. Atalanta. Starting Formation: 4-3-3 cross. 57. Marco Sportiello; 22. Davide ... «Sportinglife.com, Mei 15»

Feyenoord 2 - 2 Heerenveen

Football/; Live Centre/; Feyenoord V Heerenveen. MatchCentre. Feyenoord. Starting Formation: 4-3-3 cross. 16. Kenneth Vermeer; 26. «Sportinglife.com, Mei 15»

Chievo 1 - 1 Atalanta

Football/; Live Centre/; Chievo V Atalanta. MatchCentre. Chievo. Starting Formation: 4-4-2 cross. 1. Albano Bizzarri; 21. Nicolas Frey; 3. «Sportinglife.com, Mei 15»