CORSICA BUKU YANG BERKAIT DENGAN «PEPTIZER»
Ketahui penggunaan
peptizer dalam pilihan bibliografi berikut. Buku yang berkait dengan
peptizer dan ekstrak ringkas dari yang sama untuk menyediakan konteks penggunaannya dalam kesusasteraan Corsica.
Table 6.3 Use of peptizer in SBR 1712a [1] Peptizer dose (phr) 0 1.0 2.0 3.0 ML (
100 °C) 1 + 4 40 36 33 31 aAH mixes 4 min at 160 °C. SBR 1712 has a nominal
Mooney viscosity of 55. vulcanized rubber article from turning to soup in a ...
2
Rubber Compounding: Principles: Materials, and Techniques, ...
The MRPRA found no linear relation between decrease in viscosity and the
amount of peptizer used. The greatest reduction occurs with the first addition of
peptizer: doubling the concentration doesn't halve breakdown time. As might be ...
3
Polymer Technology Dictionary
A low-viscosity rubber prepared by adding a peptizer to latex (before coagulation
) or, by addition to dry rubber. Rubber which has been softened by the use of a
peptizing agent. By the use of peptizing agents (0 l to 0-5%) the amount of power
...
4
'99 Rubber Conference: G-Mex Centre, Manchester : June 7/8/9 ...
A reduction of 60% is given on mastication with the DBD peptizer and a reduction
of 53% is given on mastication with the PCTP peptizer. Mechanical mastication
without additive only achieved a reduction of 21% whilst mastication with the ...
5
RubberTech China '98: Three-day Conference
Their products are widely used by rubber industry with stable quality. Peptizers
Peptizers are divided into physical peptizers and chemical peptizers. The
chemical peptizer is made from the zinc salt of pentachlorothiophenol salt and
dispersing ...
6
The Science and Technology of Rubber
Other low-volume plasticizers include factice (sulfur-vulcanized vegetable oil);
fatty acid salts such as zinc stearate, which can also act as a peptizer; rosin; low-
molecular-weight polypropylene; and organosilanes such as
dimethylpolysiloxane.
James E. Mark, Burak Erman, Mike Roland, 2013
7
Benzene Derivatives—Advances in Research and Application: ...
“In other, more detailed features of the invention, the composition includes
greater than about 0.1 part, more preferably greater than about 0.5 part, and most
preferably greater than about 2.5 parts, by weight of the peptizer per 100 parts by
...
8
Current Topics in Elastomers Research
16.3.1 COMPARISON OF MIXING NR—QDI VERSUS PEPTIZERS RSS#2 was
mixed with N-234 carbon black without additive or in the presence of
quinonediime, or with a peptizer (dibenzamidodiphenyl disulfide, activated with a
metal ...
The rubber was bonded on the mill before the peptizer was added, which
required two minutes. The plasticating times started with the addition of peptizers.
Each batch was cut the same number of times and blended uniformly. The mill
gauge ...
10
Anhydrides—Advances in Research and Application: 2013 Edition
The cross-linking agent is present in an amount of from about 0.2 to about 3 parts
by weight per 100 parts by weight of the unsaturated polymer. The peptizer (if
present) is present in an amount of from about 0.01 to about 10 parts by weight
per ...
