KSIĄŻKI POWIĄZANE ZE SŁOWEM «METALLOGRAPHICALLY»
Poznaj użycie słowa
metallographically w następujących pozycjach bibliograficznych Książki powiązane ze słowem
metallographically oraz krótkie ich fragmenty w celu przedstawienia kontekstu użycia w literaturze.
1
ASM Metals Reference Book
Samples must be free from high vapor pressure liquids, such as water, organic
cleaning solutions, and remnant oil-base films Limitations • Image quality on
relatively flat samples, such as metallographically polished and etched samples,
...
2
Fossil Energy Program Report
The metallographically assessed total corrosion of the alloys was assessed
metallographically as a function of time and temperature in the simulated coal
gasification atmosphere used (mole fractions at 1 atm, 25°F, 0.2014 CO, 0.1151
CO2, ...
Gerhard Hirt, Reiner Kopp. thermo-element placed within the samples centre. A
temperature of 200 C after a cooling time of 7 s was reached, so that cooling
rates of 100–200 K sÀ1 were realized. Figure 3.15 shows the metallographically
...
Gerhard Hirt, Reiner Kopp, 2009
4
Automotive Alloys 1999: Symposium proceedings held during ...
Fractured samples were metallographically prepared to determine the fracture
mechanism. The bend testing of the above mentioned alloys were carried out by
bending them to give r/t value of ~0.1. The surface roughness measurements
were ...
5
Proceedings of the Conference on In Situ Composites, ...
The probability p (x) of finding two cracks on a fiber separated by a distance x is :
(1.11) In p(x) = Inb + (x/S) In ( I - b8) where b is the average number of cracks per
unit length, determined metallographically. By measuring the values of p< x) ...
6
Handbook of Surface and Interface Analysis: Methods for ...
13.2.2 METALLOGRAPHICALLY POLISHED SPECIMENS In this section, it is
assumed that sufficient material is available for a specimen to be mounted in a
conducting mount and polished using various grit sizes ending finally with a
micron ...
John C. Riviere, Sverre Myhra, 2009
7
Heat Treating: Proceedings of the 23rd Heat Treating Society ...
The multi-gap specimens were peel tested and metallographically evaluated and
the lap shear specimens were pulled to finalize the braze alloy selection process.
Good braze joints were obtained with both alloys. Based on the test results, ...
ASM Heat Treating Society. Conference and Exposition, Daniel Herring, Robert Hill, 2006
8
Proceedings of the International Conference on the Strength ...
Irradiated and non-irradiated molybdenum specimens have been mechanically
tested in compression and tension, at a strain rate of 4.2 10~4secM, and
subsequently examined metallographically. Results are displayed in Tables 3
and 4.
9
SPE/ANTEC 2000 Proceedings
The metallographically polished thickness sections were viewed in a scanning
electron microscope (SEM; Jeol 5400) after gold coating. Generally a 5 layer
structure composed of 2 surface (skin) 2 subsurface (shear) and 1 core layer
could be ...
10
Proceedings of Crack Paths (CP 2012), Gaeta, Italy 2012
Values of spacing between dendrite arms determined metallographically by
linear method comprise logically dendrite arms of various orders. The mean
value of dendrite arms spacing determined with use of the Eq. (5) deviates for
short local ...
WIADOMOŚCI, KTÓRE ZAWIERAJĄ SŁOWO «METALLOGRAPHICALLY»
Sprawdź, o czym dyskutuje się w prasie krajowej i zagranicznej oraz jak jest stosowane słowo
metallographically w wiadomościach.
Scratching the Surface on Corrosion Testing of Automotive Coatings
These sections were metallographically prepared in the same manner as the pre-exposure samples and retained for future reference. «Products Finishing Magazine, Cze 15»
2013 Hagen Symposium: Characterisation of the surface …
The simulated and metallographically determined density distribution is shown in Fig. 4. Metallographic and computed density figures match ... «Powder Metallurgy Review | ipmd.net, Lut 14»
Rapid Mechanical Characterization of Fiberglass Using a …
The sample was a section of fiberglass computer board, which was metallographically mounted and polished for nanoindentation. Fiberglass is ... «AZoNano.com, Maj 12»
