CĂRȚI ÎN ENGLEZĂ ÎN LEGĂTURĂ CU «BLAST INJECTION»
Descoperă întrebuințarea
blast injection în următoarea selecție bibliografică. Cărți în legătură cu
blast injection și extrase din aceasta pentru a furniza contextul de întrebuințare al acestuia în literatura Engleză.
1
The Coal Handbook: Towards Cleaner Production: Coal Utilisation
For blast furnaces of a size greater than 3000 m3, the ratio of blast-injection coal
is usually in the range 130~240 kg/ ton of hot metal production in China, based
on which the demand for blastinjection coal is presently 50–60 Mt/year. This is ...
2
Pounder's Marine Diesel Engines and Gas Turbines
Rudolf Diesel himself was never quite satisfied with this concept (which he called
self-blast injection) since it was complicated and hence susceptible to failure —
and also because the 'air pump' tapped as much as 15 per cent of the engine ...
3
Air Pollution from Motor Vehicles: Standards and ...
This generally requires the use of air- blast injection, in contrast to the fuel-only
atomization used in indirect injection systems. For direct-injection systems, an air
pump is required to supply compressed air for the air-blast injection.
Asif Faiz, Christopher S. Weaver, Michael P. Walsh, 1996
4
The Theory & Practice of Heat Engines
This system merits simplicity, oil of specific gravity in excess of 0-93 may be burnt,
and in all but high-powered engines it has driven the blast-injection system out of
the competitive field. Penetration is not as perfect as with blast injection, and ...
5
Energy Technology 2014: Carbon Dioxide Management and Other ...
... percentage in blast air required higher natural gas to maintain flame
temperature more O2 enrichment of blast injection rate Current status: Employed
at many blast furnaces in North America, at rates up to 125 kg natural gas per
THM [6].
Cong Wang, Jan de Bakker, Cynthia K. Belt, 2013
6
Light and Heavy Vehicle Technology
He therefore resorted to what was known as air-blast injection. In this system a
compressor and storage tank supplied air at a pressure much higher than that
existing in the engine cylinder, as means of injecting and atomizing the fuel oil.
Malcolm James Nunney, 2007
7
Extractive Metallurgy of Nickel, Cobalt and Platinum Group ...
... oxygen level; (c) maximizing oxygen utilization by keeping the tuyere tips
deeply submerged in the matte; and, (d) maximizing converter campaign life.
19.9. NITROGEN-SHROUDED BLAST INJECTION Oxygen enrichment above
about 30% ...
Michael Moats, Venkoba Ramachandran, Timothy Robinson, 2011
8
Advanced Direct
Injection Combustion Engine Technologies and ...
Prior to that time, the prevailing air-blast injection systems resulted in engines
that were unsuitable for automotive application on the grounds of bulk, weight,
and low power density. So-called pump-line-nozzle (PLN) systems, which had an
...
9
The Perception of Odors
technique was simple and produced results, but it is debatable whether the
odorant concentration was proportional to the area thus exposed (Wenzel, 1948).
The Blast-Injection Olfactometer Another criticism of Zwaardemaker's method
was its ...
10
Energy in Minerals and Metallurgical Industries
Boreholes for blast injection and gas removal are drilled through the overburden
of a coalfield. Linkings between the blast injection and the gas removal
boreholes are provided within the coal seam. Blast air or oxygen, with steam, are
injected ...
