CĂRȚI ÎN MALAEZĂ ÎN LEGĂTURĂ CU «STATOR»
Descoperă întrebuințarea
stator în următoarea selecție bibliografică. Cărți în legătură cu
stator și extrase din aceasta pentru a furniza contextul de întrebuințare al acestuia în literatura Malaeză.
1
Operation and Maintenance of Large Turbo-Generators - Halaman 238
may indicate reduced stator cooling water flow, while high differential pressure may be indicating high stator cooling water flow or a plugged filter. Stator Cooling Water Flow. Stator cooling water flow to the stator winding may be measured ...
Geoff Klempner, Isidor Kerszenbaum,
2004
2
Handbook of Electric Motors - Halaman 56
2.2.9.3 Current Relationship It is also necessary to know the relationship between the stator and rotor current. Neglecting the magnetizing current for the moment, the stator amp-turns must match the rotor amp-turns, as is the case in an ideal ...
Hamid A. Toliyat, Gerald B. Kliman,
2004
3
Electrical Insulation for Rotating Machines: Design, ... - Halaman 7
Large generator stator and rotor windings are frequently “directly” cooled. In direct-cooled windings, water or hydrogen is passed internally through the conductors or through ducts immediately adj acent to the conductors. Direct water-cooled ...
Greg C. Stone, Edward A. Boulter, Ian Culbert,
2004
4
Systematics of Stator of North and Central America ... - Halaman 80
Plants attacked by Stator species — Con. Host Plants Stator spp. Pithecellobium dulce limbatus P. flexica ule ( = S. flexica ulis) beali P. pallens limbatus pruininus P. sonorae limbatus Samanea saman limbatus Papilionoideae: Coursetia ...
Clarence D. Johnson, John Mark Kingsolver, United States. Agricultural Research Service,
1976
5
Performance of a tandem-rotor/tandem-stator conical-flow ...
A conical-flow compressor stage with a large radius change through the rotor was tested at three values of rotor tip clearance.
Jerry R. Wood, Albert Kimsey Owen, Lawrence F. Schumann,
1982
6
Mechatronic Systems, Sensors, and Actuators: ...
Commutation can be interpreted as the method to control the current directions in the stator and/or the armature coils so that a desired relative stator and rotor magnetic flux direction is maintained. For AC motors, commutation is done by the ...