ЧТО ОЗНАЧАЕТ СЛОВО EUTECTOID
Эвтектическая система
Эвтектическая система от греческих «ευ» и «Τήξις» представляет собой смесь химических соединений или элементов, которые имеют один химический состав, который затвердевает при более низкой температуре, чем любая другая композиция, состоящая из тех же ингредиентов. Эта композиция известна как эвтектическая композиция, а температура, при которой она затвердевает, известна как эвтектическая температура. На фазовой диаграмме пересечение эвтектической температуры и эвтектического состава дает эвтектическую точку. В неэвтектических смесях будет показано затвердевание одного компонента смеси перед другим. Не все бинарные сплавы имеют эвтектическую точку; например, в системе серебро-золото температура расплава и температура замораживания монотонно возрастают, когда смесь изменяется от чистого серебра до чистого золота.
Значение слова eutectoid в словаре английский языка
Определение слова эвтектоида в словаре представляет собой смесь веществ, подобных эвтектике, но образующих два или три составляющих из твердого вещества, а не из расплава. Другое определение эвтектоидов касается или подходит для эвтектоидных смесей.
КНИГИ НА АНГЛИЙСКИЙ ЯЗЫКЕ, ИМЕЮЩЕЕ ОТНОШЕНИЕ К СЛОВУ «EUTECTOID»
Поиск случаев использования слова
eutectoid в следующих библиографических источниках. Книги, относящиеся к слову
eutectoid, и краткие выдержки из этих книг для получения представления о контексте использования этого слова в литературе на английский языке.
1
Proceedings of the Conference on In Situ Composites, ...
In most samples, the initial portions to freeze contained lamellar eutectoid and
proeutectoid FeAl, while the last portions to freeze contained lamellar eutectoid
and proeutectoid FeAl-. Microprobe measurements yielded compositions of 32.3
wt.
2
Understanding Solids: The Science of Materials
The microstructure of pearlite is composed of: (a) Eutectoid ferrite plus austenite.
(b) Eutectoid ferrite plus eutectoid cementite. (c) Eutectoid cementite plus
austenite. A hypoeutectoid steel has a composition that lies to the: (a) Iron-rich
side of ...
Richard J. D. Tilley,
2013
3
Carburizing: Microstructures and Properties
Eutectoid Carbon Content The requirements and information in any standard are,
in general, readily understandable and realistic, as they should be. Unfortunately,
there are exceptions. For example, the surface carbon requirement for ...
4
Steel Heat Treatment Handbook
In the eutectoid steel the pearlite transformation takes place on cooling to 600-
700°C (1100-1300°F). In this case the plate-to-plate spacing equals 0.5-1 urn.
Precipitation of austenite over the temperature interval of 650-600 °C (1200-1100
°F) ...
George E. Totten, Maurice A.H. Howes,
1997
5
Copper and Copper Alloys
This is similar in appearance to the eutectoid structure in iron- carbon alloys,
where the morphology is called pearlite, and this term is used here to describe
this eutectoid structure. Figure 39 shows a microstructure typical of the eutectoid
alloy ...
6
Steel Metallurgy for the Non-metallurgist
... in turn, changes mechanical properties. Eutectoid Steel (Pearlite) In the
previous two sections, steels having compositions on either side of the eutectoid
composition of 0.77 wt% C were considered. Steels having the composition of
0.77% C ...
7
The Science & Engineering of Materials
We control dispersion strengthening in the eutectoid alloys in much the same
way that we did in eutectic alloys (Chapter 11). Controlling the Amount of the
Eutectoid By changing the composition of the alloy, we change the amount of the
hard ...
Donald Askeland, Pradeep Fulay,
2005
8
Introduction to Engineering Materials: Behavior: Properties, ...
Eutectoid Steel The eutectoid point on our abbreviated Fe-Fe3C map of Figure
6.26 is the lowest temperature and composition at which the 7 phase can exist. It
is that point corresponding to a temperature of 727°C and a composition of 99.2 ...
George Murray, Charles V. White, Wolfgang Weise,
1993
9
Principles of Engineering Metallurgy
At point x4 (eutectoid temperature), the eutectoid reaction occurs and the
eutectoid mixture (ferrite and cementite) precipitates. This eutectoid mixture is
called as pearlite which consists of alternate layers of ferrite and cementite. Thus
the final ...
10
Phase Transformations in Metals and Alloys, Third Edition ...
5.59 Schematic diagram showing relative positions of the transformation curves
for pearlite and bainite in plain carbon eutectoid steels. occurs instead through
the colony/matrix interface. Consideration of the diffusion problem in this case ...
David A. Porter, Kenneth E. Easterling,
1992
НОВОСТИ, В КОТОРЫХ ВСТРЕЧАЕТСЯ ТЕРМИН «EUTECTOID»
Здесь показано, как национальная и международная пресса использует термин
eutectoid в контексте приведенных ниже новостных статей.
Award winners 2014
He has approached a multitude of phenomena including solid-state precipitation and eutectoid growth, growth of dendrites, cells, and phase and microstructure ... «Materials World, Май 14»
Spheroidizing – Metallurgical Processes
It is conducted at temperatures that are slightly below the eutectoid temperature (temperature at which the solution is a solid solution rather than ... «Azom.com, Авг 13»
DIL 805 Quenching Dilatometer from TA Instruments
The beginning and end of the transformation specify alloy phase boundaries e.g. ferrite, pearlite, graphite, bainite, martensite, carbide, or other eutectoid phase ... «Azom.com, Авг 12»
Maintenance of way: Rail weld products and processes
... than what is currently available, thus making the weld running surface longer lasting when welding hyper-eutectoid steel metallurgy rails," Randolph says. «Progressive Rail Roading, Май 11»
Analysis of High-Collapse Grade P110 Coupling Failures - A Case …
Photomicrograph of pro-eutectoid ferrite, arrows, in a cracked Grade P110 coupling. Local variations in microstructure and hardness, due to ... «Azom.com, Ноя 10»
Mechanical Metallurgy - A Key to Optimizing Materials for Energy …
TRIP steels contain pro-eutectoid ferrite with varying amounts of retained austenite, martensite, and bainite (Figure 1). The mechanical ... «Azom.com, Апр 10»
Metals Knowledge: Contribution of Fracture Mechanics to Material …
... Mn is in most cases limited to 1.5-1.75%, because larger content leads to increase of Ar3 temperature and nucleation of pro-eutectoid ferrite. «Alibaba News Channel, Окт 09»
Metals Knowledge: The Strengthening of Iron and Steel
Perhaps the most familiar structure in steels is that of the eutectoid pearlite, usually a lamellar mixture of ferrite and cementite. This can be ... «Alibaba News Channel, Окт 09»
Metals Knowledge: High Speed Steels
The Figure 1 shows that the carbon content of the eutectoid is reduced to a very marked extent by additions of W, Mo and Cr and therefore we ... «Alibaba News Channel, Окт 09»
The State of the Tenor 2009: AJ Kluth and Ricky Sweum
But jazz musicians they are, playing what may be heard as the logical, evolutionary result of post-bop: a dry ice eutectoid of smooth, free, ... «All About Jazz, Авг 09»