КНИГИ НА АНГЛИЙСКИЙ ЯЗЫКЕ, ИМЕЮЩЕЕ ОТНОШЕНИЕ К СЛОВУ «GAMMA IRON»
Поиск случаев использования слова
gamma iron в следующих библиографических источниках. Книги, относящиеся к слову
gamma iron, и краткие выдержки из этих книг для получения представления о контексте использования этого слова в литературе на английский языке.
1
Metallographer's Guide: Practice and Procedures for Irons ...
At a temperature above 912 °C (1675 °F), the stable phase of iron is gamma iron,
which is a face-centered cubic (FCC) form of iron. Below 912 °C (1675 °F), alpha
iron is the stable phase and has a body-centered cubic (BCC) crystal structure.
2
The Metallography and Heat Treatment of
Iron and Steel
011 solidifying iron crystallites are formed consisting of octahedral crystals of
gamma iron. Upon further cooling below the solidification point, no change of
crystalline form should take place unless it be the granulation described by
Belaiew ...
3
21st Centuty Manufacturing: National Initiative For Product ...
Austenite is a solid solution with gamma iron. When steel is heated to the
hardening temperature, the grain structure transforms to austenite, which has a
face-centered cubic lattice arrangement. Upon quenching at hardening
temperature and ...
DIANE Publishing Company, 1994
4
Audel Machine Shop Basics
Beta iron occurs when it is heated from 1416°F to 1648°F. • Gamma iron—In this
phase, the iron readily takes up carbon, especially as temperature increases. If
gamma iron is cooled quickly past the critical point, the passage of the hard ...
Rex Miller, Mark Richard Miller, 2004
Gamma iron is able to hold a lot more carbon in solid solution than alpha iron; so,
as the transformation takes place the cementite in the steel separates into carbon
and iron and enters into solid solution with the gamma iron. The laminate ...
6
Ancient Metals: Microstructure and Metallurgy Volume 1
At this stage solid gamma iron phase begins to separate out. This gamma iron
will contain about 8.3% copper in solid solution. As the temperature falls, more of
the gamma iron-rich phase separates until at 1095 oC the precipitating iron ...
7
Heat Treatment : Principles and Techniques
Alloying elements affect the relative stabilities of alpha and gamma iron as also
on critical points (A4, A3, and A^and carbon content. From the point of view of
their effect on austenite and ferrite, the alloying elements can be grouped in two ...
T. V. Rajan, sharma C. P., Ashok Sharma, 2012
8
Surface effects in adhesion, friction, wear, and lubrication
The delta iron is a body-centered-cubic structure, while the gamma iron is a face-
centeredcubic structure. The delta iron has a lower density than the gamma iron
so the phosphorus may diffuse more freely and readily through the crystal lattice
...
9
Symposium on Radiation Effects on Metals and Neutron ...
S) has shown that the coherent paramagnetic gamma iron precipitate, formed on
aging a solution-annealed copper - 2.4 per cent iron alloy, begins to transform to
ferromagnetic alpha iron upon electron irradiation. He found that for a constant ...
Symposium on Radiation Effects on Metals and Neutron Dosimetry (1962, Los Angeles, Calif.), 1963
10
Construction Materials: Types, Uses and Applications
Alpha iron becomes nonmagnetic from above about 1414°F (768°C) to about
1670°F (910°C). At these temperatures it becomes gamma iron, which will hold
carbon in solid solutions up to 2% at 2066°F (1 130°C). Gamma iron is described
as ...
