10 АНГЛІЙСЬКА КНИЖКИ ПОВ'ЯЗАНІ ІЗ «CROSS-SLIDE»
Дізнайтеся про вживання
cross-slide з наступної бібліографічної підбірки. Книжки пов'язані зі словом
cross-slide та короткі уривки з них для забезпечення контексту його використання в англійська літературі.
1
Machine Shop Training Course
taper bar shoe by nut C. The jam nuts D are also adjusted so as to make contact
with either side of plate E attached to the cross-slide, thus making a positive
connection between the cross-slide and the taper bar shoe. When this stop-rod is
in ...
2
Official Gazette of the United States Patent Office
In a machine of the turret type for turning and like operations, a turret saddle, a
saddle carrying a cross-slide, a sideway opening in the saddle of the cross-slide,
a bar carried by the turret saddle and capable of moving within the opening of the
...
3
Official gazette of the United States Patent Office
stops for determining the position of the cross-slide one of which is on the slide,
mechanism for intermittently varying the position of one of said stops, and means
for continually pressing said stops together. 44. In a grinding-machine the ...
United States. Patent Office, 1905
4
Precision Machining Technology
Saddle Cross Slide The cross slide is mounted on top of the saddle and provides
cutting-tool movement perpendicular to the ways. The cross slide is attached to
the saddle with a dovetail-shaped slide for smooth movement. The crossslide ...
Peter Hoffman, Eric Hopewell, Brian Janes, 2014
On construction or road jobs, a shovel will act as a bench for making temporary
tube repairs THE handy motor drill for the cross slide of a lathe illustrated below
was made from a small worm-geared motor. The shaft was drilled to receive the ...
6
Manufacturing Processes - I
3.5 The lathe carriage: (a) Saddle (b) Cross-slide (c) Compound slide (d) Tool
post (e) Apron box (f) Carriage hand wheel (g) Power feed lever (h) Half nut (i)
Feed change lever (j) Rack (k) Swivel plate and (1) Lead screw Saddle This is an
...
7
Make this
cross-
slide stop for easier thread cutting
This handy lathe attachment, when bolted to the end of a cross slide, permits
greater control of the turning tool during thread-cutting and turning operations. It
costs less than one dollar to make. A lathe cross-slide stop is often called a
threading ...
8
Workshop Processes, Practices and Materials
Accurate movement is thus maintained relative to the centre line of the spindle
and tailstock for the complete length ofthe bed. The top surface contains the
dovetail slideway into which the cross-slide is located and the cross-slide
leadscrew, ...
9
Audel Automated Machines and Toolmaking
It is desirable that the cross-slide tools begin to cut as soon as possible after the
turret tools have completed their work. In some instances, there is no interference
. However, on work that is turned to within a short distance of the chuck, ample ...
Rex Miller, Mark Richard Miller, 2004
10
A T.B. Of Production Enginerring
For power feeding when the desired turret travel is reached, an automatic trip
lever stops further movement of the tool by disengaging the drive clutch. Cross
Slide. There are two types of cross-slides which can be used for turret lathes : (a)
side ...
НОВИНИ ІЗ ТЕРМІНОМ «CROSS-SLIDE»
Дізнайтеся, що обговорювала національна та міжнародна преса, і як термін
cross-slide вживається в контексті наступних новин.
Tool Monitoring for Multitasking Machines
Additional axis motions such as a rotating milling head (B axis) and turrets on a cross-slide (Y axis) compound this complexity. And multitasking ... «Modern Machine Shop, Вересень 14»
Large Through-Bore Turning Center Handles Big Jobs
... (648 × 2,032 mm), with swings of 34.5" (876 mm) over the front apron and 25.5" (648 mm) over the cross-slide. A servo-driven tailstock (MT5 taper) is standard, ... «Modern Machine Shop, Червень 14»
Micro Lathe Offers Compact Footprint
The tailstock quill travel measures 7/8" and the cross-slide travel is 1 1/2". A single-phase, 110-V motor provides 150 W (1/5 hp), and the variable-speed spindle ... «Modern Machine Shop, Березень 14»
Swiss-Type Lathe for Medical Applications
Five of the revolving tool units are located on the main cross-slide and two are located at the four-position backworking station. The machine's subspindle is ... «Modern Machine Shop, Вересень 12»
More Than A Machine Tool
A swiveling sub-spindle is fitted to an X, Y, Z cross-slide, which at the same time carries the bottom tool turret. This slide, with large axis travel ... «Today's Medical Developments, Вересень 11»
Grinding Shop Emphasizes Processes, Not Products
As an option, an automatically swiveling grinding spindle turret head with Hirth serration can be fitted to the cross-slide unit to accommodate up ... «American Machinist, Червень 11»
Firearms Review: The Smith & Wesson .380 Bodyguard
The S&W Bodyguard features real, visible sights in cross-slide dovetails that allow windage adjustment. The competitors have barely visible sights which are an ... «Police News, Березень 11»
A New Concept for Turning/Milling Operations
This diagonal arrangement allowed the usual cross-slide to be omitted. When combined with the play-free and wear-free hydrostatic circular ... «American Machinist, Вересень 10»
