10 АНГЛІЙСЬКА КНИЖКИ ПОВ'ЯЗАНІ ІЗ «IMPINGEMENT ATTACK»
Дізнайтеся про вживання
impingement attack з наступної бібліографічної підбірки. Книжки пов'язані зі словом
impingement attack та короткі уривки з них для забезпечення контексту його використання в англійська літературі.
1
Handbook of Corrosion Data
Stainless steels generally show excellent resistance to high velocities,
impingement attack, and cavitation in seawater. Also, stainless steels provide
optimum service in aerated seawater because a lack of aeration at a specific site
often leads ...
Bruce D. Craig, David S. Anderson, 1994
2
Corrosion: Understanding the Basics
Impingement attack has been defined as localized erosion-corrosion caused by
turbulence or impinging flow. This type of corrosion occurs in pumps, valves,
orifices, on heat exchanger tubes, and at elbows and tees in tubes or pipelines.
3
Heat Exchanger Design Handbook, Second Edition
Liquid droplet impingement erosion: Impingement attack has been defined as
localized erosion—corrosion caused by turbulence or impinging flow. Entrained
solids and air bubbles accelerate this action. Liquid droplet impingement erosion
or ...
4
Environmental Degradation of Metals: Corrosion Technology ...
... tube showing impingement attack by seawater in the direction of flow (7X). t00
3.8.2 Metallurgical Factors Soft and low-strength metals like copper,. Aqueous
Corrosion: Forms 85.
U.K. Chatterjee, S.K. Bose, S.K. Roy, 2001
5
Copper: Its Trade, Manufacture, Use, and Environmental Status
Erosion-Corrosion and Impingement A ttack Various forms of impingement attack
occur where gases, vapors, or liquids impinge on or flow turbulently along metal
surfaces at high velocities. The phenomenon is often seen in condensers or ...
Günter Joseph, Konrad J. A. Kundig, 1998
6
Uhlig's Corrosion Handbook
D. Control. of. Liquid. Droplet. Impingement. Attack. Impingement attack by liquid
droplets suspended in high-speed gas flow can be controlled by design or
materials selection. Design involves optimizing the flow system geometry ...
7
Seawater Circuits: Treatments and Materials
The attack is essentially uniform, with only a slight tendency for pitting and
crevice corrosion. In seawater flowing at velocities greater than 0.6-0.9 m/s,
copper undergoes impingement attack, and is therefore rarely used in heat
exchanger tube ...
8
Copper and Copper Alloys
The more adherent and protective the film on a particular alloy, the higher its
breakaway velocity (the velocity at which there is a transition from low to high
corrosion rate) and the greater its resistance to impingement attack or erosion-
corrosion ...
9
Corrosion Tests and Standards: Application and Interpretation
Copper-nickel alloys also have been shown to be susceptible to impingement
attack in unpolluted but more so in polluted seawater. The corrosion behavior of
copper-nickel alloys C70600 and C71500, respectively, under aerated static, ...
10
Corrosion Behaviour and Protection of Copper and Aluminium ...
Three kinds of corrosion damage can be distinguished: impingement attack,
corrosion erosion and cavitation erosion. An example of impingement attack is
shown in Fig. 1.2 [2]. Impingement attack occurs most often when the velocity of ...
НОВИНИ ІЗ ТЕРМІНОМ «IMPINGEMENT ATTACK»
Дізнайтеся, що обговорювала національна та міжнародна преса, і як термін
impingement attack вживається в контексті наступних новин.
Copper Iron (CuFe) Master Alloy
Iron improves the corrosion resistance and the resistance to impingement attack of copper nickel alloys. Iron acts as a grain refiner in brass. «Azom.com, Квітень 15»
Polishing or Cleaning of Propellers
In service sources are impingement attack (small water bourne objects), cavitation erosion and mechanical damage from impact with foreign «Maritime propulsion, Квітень 12»
