与 «AUSFORMING»相关的英语书籍
在以下的参考文献中发现
ausforming的用法。与
ausforming相关的书籍以及同一来源的简短摘要提供其在 英语文献中的使用情境。
1
Heat Treatment : Principles and Techniques
Time, Log scale — ▻ 10.4 AUSFORMING Figure 10.2 Hot-cold working TMT
cycle. Ausforming consists of heating steel above the upper critical temperature
so as to get austenite. This austenite is supercooled to a temperature below the ...
T. V. Rajan, sharma C. P., Ashok Sharma, 2012
2
Advanced Steels: The Recent Scenario in Steel Science and ...
The finish rolling has to be done close to Ar3 temperature for a proper control of
pancaking of non-recrystallized austenite grain (ausforming). The extremely pan-
caked austenite is rapidly cooled to the temperature below Ms temperature and ...
Yuqing Weng, Han Dong, Yong Gan, 2011
3
Mechanical Behavior of Materials: Second Edition
C. Ausformed Steels Steel microstructures resembling those of tempered
martensites can be produced without recourse to a quench-heat treatment cycle
by a process called ausforming. Ausforming is accomplished by cooling an
austenite ...
4
Deep Drawn
Ausforming Development Program. 12-in. Dia. ...
The recommended deformation temperature range is 1100 to 1200 F for ausforming of 300-M steel.
WAYNE A. MARTIN, LYON INC DETROIT MICH., 1961
5
Effect of Steel Manufacturing Processes on the Quality of ...
A method to reduce the size of the carbides in a material is called "ausforming" [
37\. The ausforming process consists of an isothermal "warm working" operation
performed while the material is in a metastable austenitic condition. The
austenite ...
(ii) Improvement in performance through thermo-mechanical treatment In recent
years, a thermo-mechanical technology known as the modified ausforming
method (MAF) [1], [2], has been used for the leaf springs used in automobiles. (1)
MAF ...
Yoshiro Yamada, Toshio Kuwabara, 2007
7
Fatigue and Durability of Structural Materials
Figure 11.21(a) shows the consequence (Ref 11.25) of ausforming the tool steel
H-11. Here is plotted the ratio of the high-cycle fatigue strength to the ultimate
tensile strength. The shaded band shows results for a series of high- strength
steels ...
8
Handbook of Thermal Process Modeling Steels
In the case of steels, there are some applications of precipitation hardening
process such as precipitation-hardening of stainless steels, maraging, and
ausforming. • Precipitation hardening in stainless steels occurs if coherent or
partially ...
Cemil Hakan Gur, Jiansheng Pan, 2008
9
Ultra-Fine Grained Steels
6.3.2.3 Ausforming process Ausforming process (also called thermomechanical
processing) is a technique to combine plastic deformation with heat treatment.
Generally, increased strength with improvement in ductility and/or toughness is
the ...
10
DeGarmo's Materials and Processes in Manufacturing
142 CHAPTER 6 FIGURE 6-23 T-T-T diagram for 4340 steel showing the ''bay,''
along with a schematic of the ausforming process. (Courtesy of United States
Steel Corporation, Pittsburgh, PA) Heat Treatment M s °C °F 800 700 600 500
400 ...
E. Paul DeGarmo, J. T. Black, Ronald A. Kohser, 2011
