与 «NONCORRODIBLE»相关的英语书籍
在以下的参考文献中发现
noncorrodible的用法。与
noncorrodible相关的书籍以及同一来源的简短摘要提供其在 英语文献中的使用情境。
1
Standards and Specifications for Metals and Metal Products: ...
Valves shall be fully mounted with bronze or suitable noncorrodible metal, and
be either of the double disk or made-up gate type with bronze or suitable
noncorrodible metal mounted wedging devices or have wedge-shaped gates
with double ...
George Addison Wardlaw, 1933
2
Handbook of Water and Wastewater Treatment Plant Operations, ...
Noncorrodible No. 4 mesh may be used to screen vents on elevated tanks, but
vent openings for storage facilities located underground or at ground level should
be 24 to 36 inches above the roof or ground and must be protected with a No.
3
Standards and Specifications for Nonmetallic Minerals and ...
The top shall be of noncorrodible metal, 10 inches in diameter, and with the
attached shaft shall weigh 9 pounds. The mold shall be of a noncorrodible
material, 4 inches in inside diameter at the base, 2% inches at the top, and 2
inches high.
4
Cost Effective Regulation by EPA and Small Business Impacts
New tanks may be constructed with any of the principal methods of corrosion
protection: Coated and cathodically protected steel, noncorrodible materials, or
composite tanks with a bonded layer of noncorrodible material. Existing tanks
may be ...
5
A Practical Guide for Hazardous Waste Management, ...
(Metal piping connected to noncorrodible tanks still requires corrosion protection.
) • Tanks and piping can be protected by other methods approved by the
regulatory authority. • Steel tanks (but not piping) can be protected using a
method in ...
6
Dimension Stone Use in Building Construction
To prevent this condition from occurring, any metal element that is embedded in
or is contacted by the travertine panel should be a noncorrodible metal such as
stainless steel. Expansion of Embedded Materials at Connections—At kerf ...
Kurt R. Hoigard, Michael J. Scheffler, 2007
7
Engineering News-record: 1913
Drip Vn Ive DI'lp——A positively operating noncorrodible valve must be provided
and arranged so as to properly drain the hydrant when the main valve is closed.
The seat of the waste valve, which must be fastened in the hydrant securely.
8
American Standard Building Code Requirements for Masonry
(a) The veneering shall be tied into the masonry-backing either by a header for
every 300 square inches of wall surface or by substantial, noncorrodible metal
wall ties spaced not father apart than 16 inches vertically and 24 inches
horizontally.
American Standards Association. Sectional Committee on Building Code Requirements and Good Practice Recommendations for Masonry, A41, 1944
9
Code of Federal Regulations
... of the UST system; (2) Is cathodically protected against corrosion, constructed
of noncorrodible material, steel clad with a noncorrodible material, or designed in
a manner to prevent the release or threatened release of any stored substance; ...
10
National Directory of Commodity Specifications: Classified ...
... of opening, interchangeability,_machined surfaces, water hammer, friction
losses, parts of cast—iron, cast-iron, wrought-iron, steel, parts of noncorrodible
metal, characteristics of noncorrodible metal, facing of main gate valves against
seats, ...
United States. National Bureau of Standards, Paul A. Cooley, Ann Elizabeth Rapuzzi, 1945
