与 «REVERTIVE»相关的英语书籍
在以下的参考文献中发现
revertive的用法。与
revertive相关的书籍以及同一来源的简短摘要提供其在 英语文献中的使用情境。
1
Network Recovery: Protection and Restoration of Optical, ...
There is another important aspect that we have not discussed so far in the context
of MPLS TE recovery, which has been introduced in Chapter 1: the notion of
revertive versus non-revertive mode. Indeed, once a network element failure
occurs ...
Jean-Philippe Vasseur, Mario Pickavet, Piet Demeester, 2004
2
Network Design: Principles and Applications
Switching can be either revertive or non- revertive. Revertive switching implies
that there is a preferred clock source, and that, if it has failed (whereupon one
switches away from it) and then recovers, one should switch back to the preferred
...
3
European Optical Communications and Networks: Twelfth Annual ...
After failure restoration of the main path in a shared protection architecture the
active path has to be switched back from standby to main (revertive mode). A
dedicated protection or protection with free spare capacity requires a no revertive
...
4
Network Security: Know It All: Know It All
Protection schemes can either be revertive or nonrevertive. In both schemes, if a
failure occurs, traffic is switched from the working path to the protect path. In a
nonrevertive scheme, the traffic remains on the protect path until it is manually ...
5
Optical Networking Standards: A Comprehensive Guide for ...
8.3.3.2 Operation types There are two types of protection switching operations,
namely, revertive and nonrevertive. a. Revertive operation: When the defect or
the external commands are cleared on the working channel, the normal traffic
signal ...
6
Networking 2002: Networking Technologies, Services, and ...
4.3 Results and Discussion The restoration ratio and restoration time obtained for
all possible single-link failures in the networks described above are summarized
in Table 2, both with (non-revertive) and without (revertive) stub release.
7
Designing and Implementing IP/MPLS-Based Ethernet Layer 2 ...
In MPLS FRR, the choice of routers (the HE or the PLR) to re-signal the LSP-Path
in failures is called the FRR's revertive mode. There are two revertive modes:
local revertive mode or global revertive mode. In the ALSRP, the HE router is ...
8
Treaties and Subsequent Practice
Thus, the same or similar terminology ('revertive note') may be used for different
forms of action even in a very specific bilateral treaty relationship. Other
examples for the occasional difliculty to distinguish subsequent agreements and
practice ...
9
Juniper Networks Field Guide and Reference
In revertive mode, traffic is automatically switched back to the working circuit. You
should configure the ADM and routers consistently with regard to revertive or
nonrevertive mode. To configure revertive mode, include the revert-time
statement, ...
Aviva Garrett, Gary Drenan, Cris Morris, 2002
10
100 Years of Telephone Switching
(v) For each digit of the called number, the 'revertive pulses,' on reaching the
number- setting device' of the calling subscriber, cause a countdown movement,
starting from the value of the digit set by the caller. This countdown (by magnet, ...
Robert J. Chapuis, Amos E. Joel, 2003
包含词语«REVERTIVE»的新条目
找出国内和国际出版社所讨论的内容，以及词语
revertive在以下新条目的上下文中是如何使用的。
Tug of war over scarce building areas
“These receipts would not even be enough to finance such revertive zoning,” Rime replied, adding that the levy was not the weakest point of the revision, but ... «swissinfo.ch, 一月 13»
以太网弹性技术及发展
G.8031定义了1+1双向，1+1单向和1：1双向在反转（Revertive）和非反转（Non-Revertive）模式下的线性保护切换。G.8031在2006年6月公布了正式版本，随后进行了 ... «CHINA 通讯网, 三月 09»
