与 «SOLID INJECTION»相关的英语书籍
在以下的参考文献中发现
solid injection的用法。与
solid injection相关的书籍以及同一来源的简短摘要提供其在 英语文献中的使用情境。
9.3.2 Solid Injection System In this system the liquid fuel is injected directly into
the combustion chamber without the aid of compressed air. Hence, it is also
called airless mechanical injection or solid injection system. Solid injection
systems ...
2
Internal Combustion Engines
Another is the ability to utilize fuels of high viscosity which are less expensive
than those used by the engines with solid injection systems. These advantages
are off-set by the requirement of a multistage compressor thereby making the ...
3
Internal Combustion Engines
Solid or Airless Injection Injection of fuel directly into the combustion chamber
without primary automisation is termed as solid injection. It is also termed as
mechanical injection. Main Components : The main components of a fuel
injection ...
4
Proceedings of the 20th International Conference on ...
the holes on the injection nozzle, the solid circulation rate was increased.
Therefore, we could control the amount of solid circulation rate by changing the
gas velocity in the solid injection nozzles, the amount of sorbents in the reactors,
and the ...
Guangxi Yue, Hai Zhang, Changsui Zhao,
2010
5
Magnesium Technology 2013
Conclusions To investigate the effect of the distribution of casting defects on the
fracture, X-ray CT scanning and tensile test of the AZ91D magnesium specimens
made by the semi-solid injection testing machine were performed. The fracture ...
Norbert Hort, Suveen N. Mathaudhu, Neale R. Neelameggham,
2013
6
The Fleet Type Submarine Main Propulsion Diesels Manual
In order to increase the reliability and cornpactness of these older engines. it
bccsme necessaqr to do away with the attached air compressor and shift to the
solid injection system in which the fuel alone was injected into the cylinder in a
fine ...
7
Pounder's Marine Diesel Engines and Gas Turbines
For reasons of available technology, the earliest diesel engines had to use
compressed air to achieve atomization of the fuel as it entered the cylinder (air
blast injection), and while airless (or solid) injection delivered a significant
reduction in ...
8
Analytical Instrumentation Handbook, Second Edition
Other Solid Injection Systems besides pyrolyzers have been described.5-136
These devices usually contain a plunger mechanism to place the solid sample
within the heated area of a conventional injection port An all-glass system that
uses a ...
9
Hillier's Fundamentals of Motor Vehicle Technology
The fuel pump system (or jerk pump), which is shown in simplified form in Figure
2.301, is often termed mechanical or solid injection pump, since the ejection of
the fuel is brought about by the action of the plunger on a 'solid' column of oil.
Victor Albert Walter Hillier, Peter Coombes,
2004
10
Microcellular
Injection Molding
Therefore, the vent gap depth may be kept the same as for the solid injection
molding since it needs the large gas and air volume rate released for the venting
area. The critical gap depth for venting of microcellular molding is kept the same
as ...
包含词语«SOLID INJECTION»的新条目
找出国内和国际出版社所讨论的内容，以及词语
solid injection在以下新条目的上下文中是如何使用的。
MuCell IP wins grand award in SPE auto competition
In other benefits, cycle time is reduced 15% and clamp tonnage is reduced 45%, saving an estimated $3 per vehicle versus solid injection molding. The part won ... «Plastics Today, 十一月 11»