10 ENGLISH BOOKS RELATING TO «INCENDIVITY»
Discover the use of
incendivity in the following bibliographical selection. Books relating to
incendivity and brief extracts from same to provide context of its use in English literature.
1
Taggants in explosives.
Incendivity testing is done to certify explosives and blasting assessories for use in
underground mines. Permissible explosives are those that pass the proscribed
incendivity test. An explosive charge, which is loaded into a steel cannon ...
Office of technology assessment washington dc, 1980
2
Mining Science and Technology 1996
Research. on. incendivity. of. frictional. sparks. from. light. alloys. and. their.
application. Jingxing. Zhang. Chongqing Branch of Central Coal Mining
Research Institute, Sichuan Province, China ABSTRACT: It is well-known that the
ignition of ...
T.S. Golosinski, Guo Yuguang, 1996
3
A Numerical Primer for the Chemical Engineer
Calculated cooling curve of a narrow zone in the hot-streak trail (Blickensderfer
1975). hot spots with enough incendivity. The presence of the incendive frictional
ignition sources requires minimum threshold friction distance and friction speed.
4
Lees' Loss Prevention in the Process Industries: Hazard ...
16.7.38 Discharges incendive in gas and liquid systems As far as concerns
ignition by an electrostatic discharge, what matters is the incendivity of the
discharge. Non- incendive discharges can in some cases be helpful in
dissipating charge ...
5
2005 Eos/eosd Symposium Proceedings
Glass Beads b Polycarbonate cover >•*•••• t Gas Ground wire Figure 6:
Schematic of the Spark Incendivity Probe. Samples are typically mounted on an
insulating frame using clips. Once mounted, the materials were acclimated for up
to two ...
Eos, ESD Association, 2005
6
International Seminar on Coal Science & Technology
It indicates that the average flame duration for incendivity test must be less than
14ms to cover the induction period of the methane- air mixture. In order to
understand the reaction mechanism more clearly, high —speed video
photographic ...
Ashok Kumar Singh, Kalyan Sen, Central Fuel Research Institute (India), 2005
7
Testing modified coal-cutting bit designs for reduced ...
Wallace W. Roepke, Bruce D. Hanson, United States. Bureau of Mines. TABLE 4.
- 4340 body steel incendivity tests TABLE 5. - Tungsten carbide incendivity tests
NOTE. — 60 rpm (470 ft/min) at 0.0635-cm depth of cut. SUMMARY AND ...
Wallace W. Roepke, Bruce D. Hanson, United States. Bureau of Mines, 1983
8
Directory of Fire Research in the United States
the purpose of investigating means of minimizing the spark ignition hazard of
metals against runway surfaces during crash landings. Description: Determine
the incendivity of frictional sparks by structural aircraft metals against runway
surfaces ...
As a consequence CU=Q=jIdt becomes the dominant product for the incendivity
of a discharge (Table 1 ). Care has only to be taken to comply with the validity of
this equation, but as you may set the test conditions for a product as you like, this
...
10
Bureau of Mines Report of Investigations
CONTENTS Abstract 1 Introduction 1 Exper imenta 1 work 2 Results and
discussion 4 Cone lus ions 9 Acknowledgment 9 ILLUSTRATIONS Fie. 1. Bundle
arrangement used in evaluating the relative incendivity of detonating cord 3 2.