PALABRAS DEL INGLÉS RELACIONADAS CON «TEMPERABILITY»
temperability
temperability
pered
pers
modify
addition
moderating
element
moderate
temper
doctrinaire
logic
with
little
practical
wisdom
define
habit
mind
especially
respect
irritability
patience
outbursts
anger
like
disposition
even
heat
passion
shown
defined
transitive
verb
make
suitable
desirable
from
excess
mingling
something
else
reduce
intensity
admixture
some
other
quality
reverso
meaning
also
temperable
temperately
temporality
tempera
collins
always
noun
frame
mood
humour
good
sudden
10 LIBROS DEL INGLÉS RELACIONADOS CON «TEMPERABILITY»
Descubre el uso de
temperability en la siguiente selección bibliográfica. Libros relacionados con
temperability y pequeños extractos de los mismos para contextualizar su uso en la literatura.
1
Evaluation of the Hardenability,
Temperability, and ...
Previous studies to develop an HY-130/150 submarine-hull steel indicated that a quenched and tempered Ni-Cr-Mo or Ni-Cr-Mo-V steel containing about 5% Ni appeared very promising for this application.
S. J. Manganello, L. F. Porter, UNITED STATES STEEL CORP PITTSBURGH PA., 1963
Antonino Risitano. 3.4.2.3 Nickel Steels Nickel. steel. is. qualitatively. similar. to.
manganese. steel,. producing. the. following. property. changes: •. Decreases.
critical.cooling.velocity.and.consequently.increases.temperability •.
3
MC. The Manufacturing Confectioner
Paul S. Dimick, PhD, 1991 The Effect of Cocoa Butter Origin, Milk Fat and
Lecithin Level on the Temperability of Cocoa Butter Systems, Maurice Jeffery,
1991 Influence of Milk Fat on the Crystallization & Melting Behavior of Cocoa
Butter ...
4
Failure Analysis of Heat Treated Steel Components
cracks formed during casting solidification in the mold, during heat treatment,
especially quenching and tempering, or even during heating for austenitization (
Ref 2). The risks will be reduced if steel with increased temperability is chosen, ...
5
Manufacturing Processes 1: Cutting
7.3.3.1 Manganese Manganese improves temperability and increases the
strength of steel (approx. 100 N/mm2 per 1% alloying element). Because of its
high affinity to sulphur, manganese forms sulphides with sulphur. Manganese
contents ...
Fritz Klocke, Aaron Kuchle, 2011
6
Selected Abstracts from the Abstracts Journal, Metallurgy
The hardenability of steel is generally taken to be the capacity of steel during
hardening (with cooling in oil) to obtain an increase in the of the surface by not
less than 60, while temperability is understood to be the production (as a result of
...
7
Transactions of the National Research Institute for Metals
15' 74' 26—194 The Temperability of the Manganese-Chromium Spring Steel
Manabu UENO, Iku UCHIYAMA and Akihiko HOSHINO This report gives the
result obtained from the study of the temperability of the manganese-chromium
spring ...
Kinzoku Zairyō Gijutsu Kenkyūjo (Japan), Kinzoku Zairyō Gijutsu Kenkyūjo (Japan)., 1961
8
Substitution of Manganese for Nickel in Ni-cr-mo Steels
A laboratory study was initiated in which the manganese content of six Ni-Cr-Mo steels was increased from 0.5 to 3.0% and the nickel content was decreased from 4.5 to 0.5% to maintain a calculated hardenability index of 15 to 20.
D. S. Dabkowski, S. J. Manganello, L. F. Porter, 1964
9
U.S.S.R. Abstracts of Metallurgy: Science of metals
Technological methods of estimating the temperability of structural steel and its
liability to temper brittleness^ S.I.Sakhin, Symposium: Metalloved., 2. Leningrad,
Sudpromgiz, 123-134, 1958 (25223). A description is given of new methods for ...
10
The Complete Modern Blacksmith
Therefore, for any piece of steel, a test for temperability is always advised before
you begin making a tool that must have a hardened and tough cutting edge.
TESTS FOR TEMPERABILITY Test 1. From the scrap pile choose a steel rod that
you ...
