与 «AUSTENITE»相关的英语书籍
在以下的参考文献中发现
austenite的用法。与
austenite相关的书籍以及同一来源的简短摘要提供其在 英语文献中的使用情境。
1
Handbook of Residual Stress and Deformation of Steel
Alloy elements added to case-hardening steels such as nickel, chromium, and
manganese increase retained austenite; therefore, surface carbon content
should be carefully controlled incar- burizing alloyed steels containing nickel, ...
The horizontal line at 727 °C (1341 °F) marks the range of alloy compositions
where austenite, ferrite, and cementite can coexist and designates the lowest
temperature of austenite stability under equilibrium conditions. The austenite
phase ...
George Adam Roberts, Richard Kennedy,
1998
3
Austenite formation and decomposition: proceedings of ...
Metallurgists in the field of ferrous metallurgy in both academia and industry, as well as metallurgists working in the area of phase transformations fundamentals, will find this book to be a valuable reference.
E. Buddy Damm, Matthew J. Merwin, Iron and Steel Society of AIME. Product Physical Metallurgy Committee,
2003
4
Steel Castings Handbook
If an austenitized solution treated steel containing less than 0.77% carbon is
slowly cooled from the austenite temperature region, the first phase to precipitate
from the austenite is alpha-ferrite. This transformation results in a change in the ...
Malcolm Blair, Thomas L. Stevens,
1995
5
Steel Heat Treatment Handbook
C. Transformations of Retained Austenite (Secondary Tempering) Alloying
elements have the greatest influence on the martensite transformation
temperature. This affects the amount of retained austenite in alloy steel. Some
elements (e.g. ...
George E. Totten, Maurice A.H. Howes,
1997
6
Principles of the Heat Treatment of Plain Carbon and Low ...
As for the case of isothermal formation of austenite, upon continuous heating
when all austenite is present it is not initially chemically homogeneous, but
eventually a high enough temperature (depending on the heating rate) is
attained to ...
7
An Analysis of the Kinetics, Morphology, and Mechanism of ...
Tempering step not shown 27 Figure 1.2: Carbon isopleth for a Fe-Mn-C alloy,
indicating three important regions where thermal processing steps occur 27
Figure 2.1: (a) Austenite precipitates in a polycrystalline ferrite structure.
Austenite may ...
8
Simulation of an
Austenite-Twinned-Martensite Interface
Journal of Research of the National lnstitute of Standards and Technology |J. Res
. Natl. 1nsl. Stand. Technol. 108. 413-427 (2003)] Simulation of an Austenite-
Twinned-Martensite lnterface Number 6 Developing numerical methods for ...
9
Surface Hardening of Steels: Understanding the Basics
When the austenite transforms on quenching, the carbon is “inherited” by the
martensite to produce, after tempering, the high-strength tempered martensite
that is the backbone of carbur- ized steels. The parent austenite phase influences
the ...
10
Steel Heat Treatment: Metallurgy and Technologies
2.4.2 Austenite Formation The early work on austenite formation by Robert and
Mehl [35] focused on the nucleation of austenite from a ferrite-pearlite mixture.
Various researchers have since shown the complexity of austenite formation from
a ...
包含词语«AUSTENITE»的新条目
找出国内和国际出版社所讨论的内容，以及词语
austenite在以下新条目的上下文中是如何使用的。
Optimizing Steel Properties by Controlling Retained Austenite …
Retained austenite plays a crucial role in determining the hardness, toughness and strength of martensitic steel alloys. The quenching of these ... «Azom.com, 六月 15»
New high-strength steel could help automakers improve fuel efficiency
It involves the transformation of an unstable crystal structure known as austenite, which normally exists at high temperatures, into martensite, ... «ScienceBlog.com, 六月 15»
Mi 4 (16GB) now available for Rs. 14999, down from Rs. 19999
Turning one single 309g Austenite 304 steel plate into an elegant 19g steel frame is a process that requires an incredible amount of work: it ... «Technuter, 六月 15»
Mass Reduction of Vehicles Using Advanced High Strength Steels
The secret is in the microstructure, containing a martensite, bainite, austenite phase rather than ferrite, pearlite, or cementite. This specialist ... «Azom.com, 五月 15»
AP&C's Third Plasma Atomization Reactor Put Into Service
AP&C has another reactor dedicated solely to Inconel (a family of austenite nickel-chromium-based superalloys) and other alloys. After this ... «ENGINEERING.com, 五月 15»
Stainless Steel Fabricators in Perth Provide Guide to How Stainless …
Depending on the desired characteristics, it can also contain various amounts of nickel, molybdenum, austenite, ferrite, carbon, manganese ... «PRWire, 三月 15»
Squeeze to remove heat: Elastocaloric materials enable more …
... with the "martensitic phase transformation," which is a first-order diffusionless structural transformation from austenite to martensite phase that ... «Science News, 三月 15»
Solana Beach student crowned Countywide Spelling Champion
... deals in ornamental plumes or feathers; “ledeburite,” the cementite-austenite eutectic structure in iron-carbon alloys or commercial cast iron; ... «Del Mar Times, 三月 15»
Properties and Applications of Nitinol Wire
It can then be formed into the desired 'parent' shape, with its atoms tightly packed in the austenite phase. As it cools, its atoms re-adopt the ... «Azom.com, 三月 15»
How to value a high-quality sinuous spring
“Cr”: The element of chromium can refine grain size and improve the fatigue. “Ni” The element of nickel can form stable Austenite structure. «Furniture Today, 二月 15»